The CL605 are front and back plates only.
For use with existing mortice latch or lock. The existing lock must have either a fixing hole (22mm) below follower (spindle) or two horizontal holes either side of the follower (38mm centres).
Quick Code change!
The CL600 range incorporating the new Quick Code system allows on door code change in seconds. Typically most mechanical digital locks require the lock to be removed from the door or partly disassembled to change the code.
 | Internal doors and External doors
| Front and Back Plates only – for use with existing mortice latch or
lock
| Code Free entry option
| Quick Code change - no need to remove lock from door
| Lever handle lock for doors hung on the left or right
| Available in Brushed Steel and Polished Brass
| Use in offices / schools / warehouses / hospitals / care homes /
nurseries / hotels / leisure facilities / the home | |
Available in 2 PVD Finishes
CL605 brushed steel lock available with either lever or knob handle.
Code Free access option on the keypad. In Code Free mode the outside lever will retract the latchbolt without using the code. This option is ideal for day to day use when punching in a code is not necessary e.g. external doors in a school with high traffic.
The CL605 coded plates are supplied with a random code commencing with the ‘C’ clear button. The code is non sequential, that is the code can be entered in any order e.g. 1234 can be 4321 or 1342 or whatever is the most convenient sequence. With the 12 buttons a total of 4,095 different codes are available, any of which may be entered in any order.
The CL605 has been designed so that the code can be changed on the door in seconds.
IMPORTANT: When using CL605 front and back plates only,
please test with your selected lock-case to ensure that the latch retracts
fully from the code side without too much resistance. Some lock-cases have a
heavily sprung latch follower designed to use with un-sprung lever furniture.
This heavy springing can defeat the clutch on our locks.
If in doubt do not specify one of our locks with a lock-case that is designed
for use with un-sprung lever furniture. Please note the code chamber for
mechanical locks requires the lever to be rotated at least 45 degrees to
re-set the lock the for next code user. Please contact our technical
department if you are unsure. Securasound Limited does not accept
responsibility for products incorrectly specified.
