|
|
PLATES ONLY. Back to Back version. The CL605 BB are front and back plates only. For use with existing mortice latch or lock providing coded access in both directions plus Code Free option. The existing lock must have either a fixing hole (22mm) below follower (spindle).
Quick Code change! The CL600 range incorporating the new Quick Code system allows on door code change in seconds. Typically most mechanical digital locks require the lock to be removed from the door or partly disassembled to change the code.
Available in one PVD Finishes Brushed Steel
CL605 BB brushed steel lock available with either lever or knob handle. In Code Free mode the outside lever will retract the lactchbolt without using
a code. This option is ideal for day to day use when punching in a code is not
necessary e.g. external doors in a school with high traffic. The CL605 BB coded
plates are supplied with a random code commencing with the ‘C’ clear button.
The code is non sequential, that is the code can be entered in any order e.g.
1234 can be 4321 or 1342 or whatever is the most convenient sequence. The CL605 BB has been designed so that the code can be changed on the door in seconds. IMPORTANT: When using CL605 BB front and back plates only, please test with your selected lock-case to ensure that the latch retracts fully from the code side without too much resistance. Some lock-cases have a heavily sprung latch follower designed to use with un-sprung lever furniture. This heavy springing can defeat the clutch on our locks. If in doubt do not specify one of our locks with a lock-case that is designed for use with un-sprung lever furniture. Please note the code chamber for mechanical locks requires the lever to be rotated at least 45 degrees to re-set the lock the for next code user. Please contact our technical department if you are unsure. Securasound Limited does not accept responsibility for products incorrectly specified.
|
|
Email: Info@Securasound.co.uk T 01948 667600 |
